dmesg - processor cache test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-41-generic (buildd@lgw01-56) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #48~14.04.1-Ubuntu SMP Fri Jun 24 17:09:15 UTC 2016 (Ubuntu 4.2.0-41.48~14.04.1-generic 4.2.8-ckt11)
Command line: BOOT_IMAGE=/vmlinuz-4.2.0-41-generic root=/dev/mapper/compute4--vg-root ro nomdmonddf nomdmonisw
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000094fff] usable
BIOS-e820: [mem 0x0000000000095000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d6000-0x00000000000d7fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfefffff] usable
BIOS-e820: [mem 0x00000000bff00000-0x00000000bff0afff] ACPI data
BIOS-e820: [mem 0x00000000bff0b000-0x00000000bff0bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bff0c000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Supermicro X7DWA/X7DWA, BIOS 6.00 11/15/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 3FC0000000 uncachable
1 base 0000000000 mask 3C00000000 write-back
2 base 0400000000 mask 3FC0000000 write-back
3 base 00BFF80000 mask 3FFFF80000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 16GB, type WB
reg 2, base: 16GB, range: 1GB, type WB
reg 3, base: 3145216KB, range: 512KB, type UC
total RAM covered: 16383M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3145216KB, range: 512KB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f65d0-0x000f65df] mapped at [ffff8800000f65d0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008f000] 8f000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff6000, 0x01ff6fff] PGTABLE
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 2M
BRK [0x01ff9000, 0x01ff9fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43fdfffff]
[mem 0x420000000-0x43fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfefffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfefffff] page 4k
init_memory_mapping: [mem 0x100000000-0x41fffffff]
[mem 0x100000000-0x41fffffff] page 2M
BRK [0x01ffa000, 0x01ffafff] PGTABLE
BRK [0x01ffb000, 0x01ffbfff] PGTABLE
RAMDISK: [mem 0x355d0000-0x36adffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F65A0 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFF048C5 0000A4 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFF0AD22 0000F4 (v03 INTEL STOAKLEY 06040000 PTL 00000003)
ACPI: DSDT 0x00000000BFF0643B 004873 (v01 Intel SEABURG 06040000 MSFT 0100000E)
ACPI: FACS 0x00000000BFF0BFC0 000040
ACPI: FACS 0x00000000BFF0BFC0 000040
ACPI: _MAR 0x00000000BFF0AE16 000030 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: TCPA 0x00000000BFF0AE46 000032 (v01 Intel STOAKLEY 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BFF0AE78 0000D4 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 0x00000000BFF0AF4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFF0AF88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 0x00000000BFF0AFB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: SSDT 0x00000000BFF061DC 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF06136 0000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF06090 0000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF05FEA 0000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF05F44 0000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF05E9E 0000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF05DF8 0000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF05D52 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF04969 0013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
NODE_DATA(0) allocated [mem 0x43ffee000-0x43fff2fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000094fff]
node 0: [mem 0x0000000000100000-0x00000000bfefffff]
node 0: [mem 0x0000000100000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
On node 0 totalpages: 4193940
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3988 pages, LIFO batch:0
DMA32 zone: 12220 pages used for memmap
DMA32 zone: 782080 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff]
PM: Registered nosave memory: [mem 0x000d6000-0x000d7fff]
PM: Registered nosave memory: [mem 0x000d8000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbff00000-0xbff0afff]
PM: Registered nosave memory: [mem 0xbff0b000-0xbff0bfff]
PM: Registered nosave memory: [mem 0xbff0c000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4128387
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-41-generic root=/dev/mapper/compute4--vg-root ro nomdmonddf nomdmonisw
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16408164K/16775760K available (7967K kernel code, 1248K rwdata, 3820K rodata, 1472K init, 1292K bss, 367596K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:1304 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 2500.036 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.07 BogoMIPS (lpj=10000144)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eaa000 - ffffffff81eb1000)
ftrace: allocating 31004 entries in 122 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (40002.61 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbff0b000-0xbff0bfff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 9:52:39, date: 06/06/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x41 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-07] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci 0000:00:00.0: [8086:4003] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:4021] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [8086:402f] type 00 class 0x088000
pci 0000:00:0f.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0604000-0xd0607fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd0608000-0xd06083ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1880-0x188f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 0x14: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 0x18: [io 0x18c0-0x18c7]
pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
pci 0000:00:1f.2: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1f.2: reg 0x24: [mem 0xd0608400-0xd06087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
pci 0000:01:00.0: [1002:9505] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0100000-0xd010ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa18] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd0110000-0xd0113fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:3500] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: [8086:350c] type 01 class 0x060400
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: System wakeup disabled by ACPI
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 03-06]
pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:04:00.0: [8086:3510] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:03:00.0: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:03:00.3: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:10a7] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xd0020000-0xd003ffff]
pci 0000:07:00.0: reg 0x14: [mem 0xd0000000-0xd001ffff]
pci 0000:07:00.0: reg 0x18: [io 0x3000-0x301f]
pci 0000:07:00.0: reg 0x1c: [mem 0xd0080000-0xd0083fff]
pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.1: [8086:10a7] type 00 class 0x020000
pci 0000:07:00.1: reg 0x10: [mem 0xd0060000-0xd007ffff]
pci 0000:07:00.1: reg 0x14: [mem 0xd0040000-0xd005ffff]
pci 0000:07:00.1: reg 0x18: [io 0x3020-0x303f]
pci 0000:07:00.1: reg 0x1c: [mem 0xd0084000-0xd0087fff]
pci 0000:07:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:08:08.0: [104c:8023] type 00 class 0x0c0010
pci 0000:08:08.0: reg 0x10: [mem 0xd0204000-0xd02047ff]
pci 0000:08:08.0: reg 0x14: [mem 0xd0200000-0xd0203fff]
pci 0000:08:08.0: supports D1 D2
pci 0000:08:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci 0000:03:00.3: Max Payload Size 256, but upstream 0000:00:09.0 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *3
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00095000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0295-0x0296] has been reserved
system 00:00: [io 0x0ca2-0x0ca3] has been reserved
system 00:00: [io 0x0ca8-0x0caf] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x1000-0x107f] could not be reserved
system 00:00: [io 0x1180-0x11bf] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:00: [mem 0xfec88000-0xfec88fff] could not be reserved
system 00:00: [mem 0xfec89000-0xfec89fff] could not be reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed44fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [dma 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:03:00.0: PCI bridge to [bus 04-05]
pci 0000:03:00.3: PCI bridge to [bus 06]
pci 0000:00:09.0: PCI bridge to [bus 03-06]
pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:07:00.0: BAR 6: assigned [mem 0xd00a0000-0xd00bffff pref]
pci 0000:07:00.1: BAR 6: assigned [mem 0xd00c0000-0xd00dffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd0300000-0xd03fffff]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:07: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xd0200000-0xd02fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:08: resource 8 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (32 != 64), using 64 bytes
pci 0000:07:00.0: Disabling L0s
pci 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
pci 0000:07:00.1: Disabling L0s
pci 0000:07:00.1: can't disable ASPM; OS doesn't have ASPM control
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21568K (ffff8800355d0000 - ffff880036ae0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbf00000-0xbff00000] (64MB) mapped at [ffff8800bbf00000-ffff8800bfefffff]
microcode: CPU0 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU1 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU2 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU3 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU4 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU5 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU6 sig=0x10676, pf=0x40, revision=0x606
microcode: CPU7 sig=0x10676, pf=0x40, revision=0x606
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1528278758.632:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001c00000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
libphy: Fixed MDIO Bus: probed
ata2: port disabled--ignoring
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0608000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-41-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-41-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-41-generic uhci_hcd
tsc: Refined TSC clocksource calibration: 2500.088 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24098d02fde, max_idle_ns: 440795268616 ns
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-41-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-41-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
clocksource: Switched to clocksource tsc
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a7768e199f829996fdcde8bd9b6973af5c7631f5'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 6:741:878
rtc_cmos 00:01: setting system clock to 2018-06-06 09:52:41 UTC (1528278761)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Freeing unused kernel memory: 1472K (ffffffff81d3a000 - ffffffff81eaa000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
Freeing unused kernel memory: 276K (ffff880001bbb000 - ffff880001c00000)
systemd-udevd[158]: starting version 204
md: linear personality registered for level -1
Floppy drive(s):
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
fd0 is 1.44M
md: multipath personality registered for level -4
PTP clock support registered
FDC 0 is a post-1991 82077
ahci 0000:00:1f.2: version 3.0
md: raid0 personality registered for level 0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608500 irq 17
ata4: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608580 irq 17
ata5: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608600 irq 17
ata6: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608680 irq 17
ata7: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608700 irq 17
ata8: SATA max UDMA/133 abar m1024@0xd0608400 port 0xd0608780 irq 17
dca service started, version 1.12.1
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
firewire_ohci 0000:08:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
ata4.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD2500YS-01S 6C06 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD2500YS-01S 6C06 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
md: raid1 personality registered for level 1
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
raid6: sse2x1 gen() 4920 MB/s
raid6: sse2x1 xor() 4365 MB/s
firewire_core 0000:08:08.0: created device fw0: GUID 00304800001009e2, S400
raid6: sse2x2 gen() 6657 MB/s
raid6: sse2x2 xor() 5162 MB/s
random: nonblocking pool is initialized
raid6: sse2x4 gen() 8503 MB/s
raid6: sse2x4 xor() 5782 MB/s
raid6: using algorithm sse2x4 gen() 8503 MB/s
raid6: .... xor() 5782 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 47636.000 MB/sec
generic_sse: 8884.000 MB/sec
xor: using function: prefetch64-sse (47636.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:7f:48:50
igb 0000:07:00.0: eth0: PBA No: Unknown
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
md: raid10 personality registered for level 10
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:7f:48:51
igb 0000:07:00.1: eth1: PBA No: Unknown
igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
EXT4-fs (dm-4): write access will be enabled during recovery
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (527) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (536) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (540) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (542) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (544) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 4190204k swap on /dev/mapper/compute4--vg-swap_1. Priority:-1 extents:1 across:4190204k FS
EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
systemd-udevd[670]: starting version 204
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i5400_edac.c controller I5400: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5400_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
intel_rng: FWH not detected
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
ioatdma: Intel(R) QuickData Technology Driver 4.00
------------[ cut here ]------------
WARNING: CPU: 6 PID: 703 at /build/linux-lts-wily-2axo4v/linux-lts-wily-4.2.0/drivers/iommu/intel-iommu.c:3800 quirk_ioat_snb_local_iommu+0xa5/0xb0()
BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device
Modules linked in: ioatdma(+) serio_raw snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm i5400_edac edac_core snd_timer i5k_amb snd parport_pc(+) soundcore parport 8250_fintek shpchp mac_hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid1 igb i2c_algo_bit firewire_ohci dca raid0 ahci firewire_core ptp multipath libahci pata_acpi crc_itu_t pps_core floppy linear dm_mirror dm_region_hash dm_log
CPU: 6 PID: 703 Comm: systemd-udevd Not tainted 4.2.0-41-generic #48~14.04.1-Ubuntu
Hardware name: Supermicro X7DWA/X7DWA, BIOS 6.00 11/15/2007
0000000000000000 ffff88042380b908 ffffffff817bbb8b ffff88042380b958
ffffffff81b17bc0 ffff88042380b948 ffffffff8107998a ffff88042380b9c4
ffff88042d31b000 ffffffff81b5f908 ffff880428523200 ffff88042d31b000
Call Trace:
[] dump_stack+0x63/0x81
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_fmt_taint+0x3f/0x50
[] quirk_ioat_snb_local_iommu+0xa5/0xb0
[] pci_fixup_device+0xee/0x220
[] do_pci_enable_device+0x63/0xf0
[] pci_enable_device_flags+0xbf/0x110
[] pcim_enable_device+0x56/0xb0
[] ioat_pci_probe+0x18/0x1a0 [ioatdma]
[] local_pci_probe+0x45/0xa0
[] ? pci_match_device+0xf4/0x120
[] pci_device_probe+0xca/0x110
[] driver_probe_device+0x23a/0x480
[] __driver_attach+0x90/0xa0
[] ? driver_probe_device+0x480/0x480
[] bus_for_each_dev+0x5d/0x90
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1d0/0x290
[] ? 0xffffffffc0119000
[] driver_register+0x60/0xe0
[] __pci_register_driver+0x4c/0x50
[] ioat_init_module+0x8a/0x1000 [ioatdma]
[] do_one_initcall+0xcd/0x1f0
[] ? __vunmap+0xae/0xf0
[] ? kmem_cache_alloc_trace+0x1b4/0x240
[] ? do_init_module+0x28/0x1ea
[] do_init_module+0x61/0x1ea
[] load_module+0x1401/0x1b40
[] ? __symbol_put+0x40/0x40
[] SyS_finit_module+0x80/0xb0
[] entry_SYSCALL_64_fastpath+0x16/0x75
---[ end trace daad7f06b4d77116 ]---
ioatdma 0000:00:0f.0: channel enumeration error
ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
[drm] Initialized drm 1.1.0 20060810
lp0: using parport0 (interrupt-driven).
device-mapper: multipath: version 1.9.0 loaded
snd_hda_codec_realtek hdaudioC0D2: ignore pin 0x1b with mismatching assoc# 0x2 vs 0x1
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input3
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
ppdev: user-space parallel port driver
[drm] radeon kernel modesetting enabled.
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 462 to 511 on gpio_ich
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
audit: type=1400 audit(1528278775.448:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1528278775.448:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV670 0x1002:0x9505 0x1043:0x0234).
[drm] register mmio base: 0xD0100000
[drm] register mmio size: 65536
ATOM BIOS: 9505.10.68.0.2.AS07
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 8215860 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RV670 Microcode
EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: failsafe main process (1116) killed by TERM signal
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000254000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880422734c00
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffc90002c121d0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_LVTM1
[drm] fb mappable at 0xC0355000
[drm] vram apper at 0xC0000000
[drm] size 5324800
[drm] fb depth is 24
[drm] pitch is 5888
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
nbd: registered device at major 43
igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
init: wait-for-state (nova-computelibvirt-bin) main process (1696) killed by TERM signal
perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5080 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10010 > 10000), lowering kernel.perf_event_max_sample_rate to 12500